User avatar
dkightley
Posts: 2282
Joined: Tue Mar 10, 2015 4:09 pm

Re: Print parts of single object sequentially

Fri Apr 17, 2020 5:35 am

All attempts to get these three parts to print using sequential printing will FAIL....due to a change in sequential printing behaviour introduced by one of the upgrades....can't remember which one.

When sequential printing multiple parts, if yo place them too close together the sequential printing doesn't work. Move them a little further apart...and sequential printing works. Overlap them.....forget it!

Some would label this as a bug......S3D will probably say its a feature. I label it as an unwanted and undesirable change in functionality that was ill-thought!
Doug Kightley
Volunteer at the National Tramway Museum http://www.tramway.co.uk
Railway modeller and webmaster at http://www.talkingtgauge.net

monomgabriel
Posts: 9
Joined: Sat Apr 11, 2020 8:55 pm

Re: Print parts of single object sequentially

Mon Apr 20, 2020 6:28 pm

Do you mean there is no way to print a single object sequentially in Simplify3D?
Do you know another slicer that might do the job?

There is no offense to Simplify3D in my question, I just need a quick way to solve the issue.

monomgabriel
Posts: 9
Joined: Sat Apr 11, 2020 8:55 pm

Re: Print parts of single object sequentially

Tue Apr 21, 2020 7:58 pm

After another test here is what I get:
Image
A collide inside the base for the second part!
Any idea to fix this?

User avatar
DarthRevan
Posts: 477
Joined: Wed Feb 18, 2015 8:29 am

Re: Print parts of single object sequentially

Thu Apr 23, 2020 3:23 pm

monomgabriel wrote:
Tue Apr 21, 2020 7:58 pm
After another test here is what I get:
Image
A collide inside the base for the second part!
Any idea to fix this?
The nozzle can't swivel to allow you to print in those corners. You need to measure what your sequential printing clearances are for your nozzle. If the nozzle is fairly standard size you only have about 0.4-0.8mm of clearance if you're trying to print in a nested hole like this.

monomgabriel
Posts: 9
Joined: Sat Apr 11, 2020 8:55 pm

Re: Print parts of single object sequentially

Thu Apr 23, 2020 4:57 pm

I am not trying to build inside this hole, I would like the base to be entirely done before printing the cylinders.

Return to “Feature Requests”