twardnw
Posts: 1
Joined: Mon May 11, 2020 6:28 pm

skirt should print at same speed as all other first layer elements

Thu May 14, 2020 8:11 pm

The skirt apparently uses the infill speed to print, and is not configureable. This is a request to have the skirt honor the first layer print speed, and/or have it's own speed setting.

S3D-Jake
Posts: 753
Joined: Wed Jun 20, 2018 12:45 pm

Re: skirt should print at same speed as all other first layer elements

Wed May 27, 2020 1:44 pm

The skirt does use the default print speed as its base for assigning a print speed. The first layer underspeed setting from the Layer tab does apply to the skirt's first layer. This is seen quite easily in the resulting G-Code. If you're having issues with seeing the print speed updated according to the first layer speed modifier please attach your print file.
"A bird does not sing because it has an answer. It sings because it has a song."

Return to “Feature Requests”