tee_nalle
Posts: 2
Joined: Mon Oct 05, 2015 5:56 am

Solid angle

Mon Oct 05, 2015 6:02 am

Hi.

When I use multiple processes for a print and the first process is one layer thick then the two bottom layers have the same angle on the solid bottom. Witch make it a little more fragile than it should be.

A natural thing would be that the program used the same angles that I have specified in "Infill".

Regards Tomas Wallentinus

bapro
Posts: 65
Joined: Mon Mar 02, 2015 11:11 am

Re: Solid angle

Mon Oct 05, 2015 10:52 am

The softwaer starts at the angel you specified. If your settings are 45 and -45, you have to make it -45 and 45 for your other process.

tee_nalle
Posts: 2
Joined: Mon Oct 05, 2015 5:56 am

Re: Solid angle

Mon Oct 05, 2015 5:00 pm

HI.

Doesn't work on my setup. On the first process only printing the first layer the infill angles are 45 and -45. On the second process that is used fore layer two and up they are -45 and 45. But in the print preview I can see that its the same angle on both layers.

Regards Tomas Wallentinus

bapro
Posts: 65
Joined: Mon Mar 02, 2015 11:11 am

Re: Solid angle

Tue Oct 06, 2015 10:33 am

Ok, I see that now.
It wasn´t like that before as I remember.
Must be a bug.

Return to “Feature Requests”