bilsch
Posts: 6
Joined: Mon Aug 31, 2015 10:15 pm

brim outside of printable space - really?

Sun Jan 10, 2016 3:31 pm

I'm kind of surprised that the software does not already do this. If you have an object on the bed which, with brim, exceeds the dimensions of the bed, why would the slicer still try to put material there?

https://dl.dropboxusercontent.com/u/863 ... e_area.jpg

I've had a few plates where s3d would happily print outside of the configured workspace.

Running Simplify3d 3.0.2

theDiver
Posts: 16
Joined: Wed Dec 09, 2015 5:06 am

Re: brim outside of printable space - really?

Fri Jan 15, 2016 3:25 am

+1

Hmmm sounds like the program does not care about the dimensions :-(

Most be a bug.

Yona.Appletree
Posts: 10
Joined: Thu Feb 26, 2015 3:38 pm

Re: brim outside of printable space - really?

Sat Jan 23, 2016 4:08 pm

+1

I've had this happen with all of the automatic inclusions. It appears that there is no bound checking whatsoever for the things in the "Additions" tab. Seems like sloppy coding :/

zemlin
Posts: 323
Joined: Mon Feb 01, 2016 11:36 am

Re: brim outside of printable space - really?

Tue Feb 02, 2016 9:55 am

+1 - bounds checking on additions would be good for sure. I've also had to watch the edges of the plate on the previews.

Hugo.ID
Posts: 3
Joined: Tue Nov 08, 2016 8:08 am

Re: brim outside of printable space - really?

Tue Nov 08, 2016 8:16 am

+1 Been bugging me for almost 2 years now, I need the brim, but this just causes significantly too many issues

Return to “Feature Requests”