Kldz
Posts: 5
Joined: Sat Mar 11, 2017 5:18 pm

Re: Adjust print speed for overhangs

Wed May 17, 2017 5:26 pm

+1

timpuri
Posts: 1
Joined: Sat May 20, 2017 4:54 pm

Re: Adjust print speed for overhangs

Sat May 20, 2017 4:56 pm

+1

fiekemike
Posts: 11
Joined: Fri Jan 27, 2017 1:14 pm

Re: Adjust print speed for overhangs

Wed May 24, 2017 1:41 pm

+1
good idea, will greatly improve quality without increasing the printing time too much

aubergine18
Posts: 4
Joined: Wed May 24, 2017 9:06 pm

Re: Adjust print speed for overhangs

Wed May 24, 2017 9:23 pm

+1 for this

The workaround is somewhat cumbersome, I'd expect relatively expensive software to handle this sort of thing for me.

jrw
Posts: 7
Joined: Mon May 29, 2017 10:31 am

Re: Adjust print speed for overhangs

Mon May 29, 2017 11:38 am

This feature is an absolute must for any slicer. It will improve the print immensely where it needs it the most, at no extra cost in terms of time or material, and is not very difficult to implement. I've attached an image showing how the print speed should look like for the Benchy model on the upper side arcs, where there will always be drooping material if not printed slow enough. As the overhangs get more pronounced, the print speed should gradually get slower.
SnapShot 102.png

ieatacid
Posts: 13
Joined: Tue Aug 08, 2017 5:34 pm
Location: Scranton, PA

Re: Adjust print speed for overhangs

Sat Sep 02, 2017 4:12 pm

jrw wrote:This feature is an absolute must for any slicer. It will improve the print immensely where it needs it the most, at no extra cost in terms of time or material, and is not very difficult to implement. I've attached an image showing how the print speed should look like for the Benchy model on the upper side arcs, where there will always be drooping material if not printed slow enough. As the overhangs get more pronounced, the print speed should gradually get slower.
SnapShot 102.png
+1

This would be great to have, especially in the situation above, where using multiple processes either wouldn't work or would be extremely tedious.

pyrotech20
Posts: 2
Joined: Mon Apr 09, 2018 4:58 am

Re: Adjust print speed for overhangs

Mon Apr 09, 2018 5:01 am

+1 (and bump)

goldcd
Posts: 3
Joined: Tue Apr 10, 2018 5:44 pm

Re: Adjust print speed for overhangs

Tue Apr 10, 2018 5:48 pm

+1
Not sure if it's reassuring or not to sign up to post an idea, and see I'm not alone in thinking this would be useful..

airscapes
Posts: 268
Joined: Tue Mar 06, 2018 10:35 am
Location: Philadelphia PA Area

Re: Adjust print speed for overhangs

Wed Apr 11, 2018 5:30 am

+1

DiegoPear
Posts: 7
Joined: Tue Jul 25, 2017 10:51 pm

Re: Adjust print speed for overhangs

Sat Apr 14, 2018 9:15 am

+1

Return to “Feature Requests”