Posts: 10
Joined: Fri Feb 24, 2017 1:29 pm

auto bed leveler

Fri Feb 24, 2017 1:34 pm

Can you modify the bed leveler to raise a settable amount between each test to allow access to leveling screws. On my TAZ5 there is not enough access room to get to the leveling screws on all corners. If you provided a "Z" height for each corner it would greatly increase the use ability of your leveling tool.
Thank You

Posts: 1243
Joined: Mon Nov 28, 2016 5:35 am

Re: auto bed leveler

Sat Feb 25, 2017 4:45 am

The automatic bed leveling probe on the TAZ is controlled by the firmware, so if you want to change how that behaves, you will need to edit the firmware itself.

Return to “Feature Requests”