Posts: 141
Joined: Sun Sep 10, 2017 11:06 pm

Re: Perimeter around surface layers on top of infill

Tue Jun 11, 2019 12:24 am

Or an option to inflate the external Infill by a (mm) amount if adjacent to internal infill would be perfect. Just like the option to inflate bridging there would be expand external infill. This is the one thing S3D does less then poorly.
The logic is already there in their code. Just need to apply it here.

I find myself spliting a process when I do catch this (a real pain)
then the internal infill captures the layer below it so you end up with something like this. But if thing are on an angle... forget it. ask here
viewtopic.php?f=23&t=12895&hilit=inflate with no response but same thing.
Even making the internal infill solid does not work as there is no overlap of internal to external option just outline overlap.
inflate external infill.PNG

Posts: 1
Joined: Wed Nov 06, 2019 2:27 pm

Re: Perimeter around surface layers on top of infill

Wed Nov 06, 2019 2:32 pm

Has this been resolved?
I find this a big problem with large prints on my 3DP1000.
The edges of the unsupported top layer lift and can cause the extruder to be knocked around when performing the nest layer.

Also can leave a lump/mess in top layers.

Adding a boarder with overlap would solve this.

Return to “Feature Requests”