aaronn7909
Posts: 2
Joined: Fri Apr 30, 2021 5:47 am

Enable fan if print time is below t seconds

is there a away to Enable fan if print time is below t seconds
S3D-Rick
Posts: 23
Joined: Thu Jul 30, 2020 11:09 am

Re: Enable fan if print time is below t seconds

Yes, in the Cooling tab, "Increase fan speed for layers below __ sec" does this.
aaronn7909
Posts: 2
Joined: Fri Apr 30, 2021 5:47 am

Re: Enable fan if print time is below t seconds

If I turn on cooling and set a layer height to 0 and just the seconds it will work ill give it a go the next time im playing with the 3d printer thanks

Return to “General Discussion and Tips”