Bubble68159
Posts: 2
Joined: Thu Jun 10, 2021 6:25 am

Dual Color Printing Issues - Creatbot F430

Wed Jun 16, 2021 6:18 am

Hello,

I am facing an issue with my Creatbot F430.
The nozzle which isn't the printing one is always extruding a little bit of filament.
That causes the printed part to be extremely stringy.
I activated the "Prime Pillar" and the "Use Ooze Shield" functions.
But it didn't fix my problem.

Any ideas?

Best regards.

Bubble

Return to “General Discussion and Tips”