User avatar
ClintGoss1
Posts: 23
Joined: Tue Apr 10, 2018 8:38 am

S3D Settings Manual

Mon Apr 30, 2018 3:48 am

Here’s my personal S3D Settings Manual – extensive info I've collected from various sources on each the S3D Parameters and Settings. This third version adds lots of info I’ve found on how various profile settings affect strength (88 pages, 3.4 MB):

http://www.BreathFlute.com/pdf/S3D_SettingsCG.pdf

Organizing this info into a single document has been a wonderful learning tool and has helped me produce better printed models. It might be useful to others. However …

Disclaimer: This information is not authoritative nor an official voice of the authors of S3D.

The information includes substantial input from users of this forum, including the Tip of the Day posts by user KeyboardWarrior and posts by Airscapes.

This version of the document carries the date stamp 4/30/2018, but the link above will always have the latest version of this document …

I hope this document is useful!

… Feedback is always welcome …
-- Clint Goss

User avatar
ClintGoss1
Posts: 23
Joined: Tue Apr 10, 2018 8:38 am

Re: S3D Settings Manual

Wed May 09, 2018 4:02 pm

I've posted an updated (and expanded) Settings document - now 96 pages, incorporating Matt Harrison’s Extruder Calibration procedure, some suggestions from Tom Sanladerer, and a "Metes and Bounds" section based on Maximum Melt Volume.

I also have packages of files specific to the Prusa i3 Mk3 - a set of 12 core profiles that I have collected for that printer, as well as my own profile that I use for PLA on the Mk3. My own core profile is based on the S3D profile for the Mk3, with modifications suggested by the other core profiles and various recommendations. All settings changes are documented with the source or rationale for the changed.

Updated S3D Settings Manual: http://www.BreathFlute.com/pdf/S3D_SettingsCG.pdf

Collection of 12 “core” profiles for the Prusa i3 Mk3 (including 4 from S3D and the Josef Průša profile from 1/3/18) and a document that highlights the differences: http://www.breathflute.com/zip/S3D_Pi3M ... les_CG.zip

My current core profile for the Prusa i3 Mk3 for PLA extruded at 0.40: http://www.BreathFlute.com/zip/S3D_Pi3M ... 180504.zip

I hope this is useful! … feedback always welcome …
-- Clint Goss

User avatar
DarthRevan
Posts: 460
Joined: Wed Feb 18, 2015 8:29 am

Re: S3D Settings Manual

Thu May 10, 2018 12:53 pm

96 Pages is quite the compilation. Thanks for sharing your profiles too!

User avatar
ClintGoss1
Posts: 23
Joined: Tue Apr 10, 2018 8:38 am

Re: S3D Settings Manual

Tue Oct 02, 2018 5:00 pm

Hi All -- I've just posted a significant update to my Simplify3D Settings Manual. Available for download near the bottom of this page: http://breathflute.com/download.htm
ClintS3DSettingsManual_Cover_250x324c10.jpg
ClintS3DSettingsManual_Cover_250x324c10.jpg (55.77 KiB) Viewed 5377 times
-- Clint Goss

pwatson100
Posts: 1
Joined: Wed Sep 05, 2018 2:02 am

Re: S3D Settings Manual

Wed Oct 10, 2018 5:02 pm

This is a really useful guide. Thank you for compiling and sharing.

rickygene
Posts: 1
Joined: Tue Oct 16, 2018 7:52 pm

Re: S3D Settings Manual

Tue Oct 16, 2018 7:57 pm

Clint,
Thank you for putting the time in to compile this excellent resource. It deserves pinning at the top of the forum - maybe you could approach the moderators of the forum to ask?
Regards
Rick

zfrenchy
Posts: 2
Joined: Sat Jan 05, 2019 12:27 pm

Re: S3D Settings Manual

Sat Jan 05, 2019 12:30 pm

I was starting to do a manual for S3D when I found your.

Awesome job, very pro.

User avatar
ClintGoss1
Posts: 23
Joined: Tue Apr 10, 2018 8:38 am

Re: S3D Settings Manual

Mon Jan 07, 2019 8:07 pm

zfrenchy wrote:
Sat Jan 05, 2019 12:30 pm
I was starting to do a manual for S3D when I found your.

Awesome job, very pro.
Thanks! I am working on an update ... I'll post it here when it's ready ...
-- Clint Goss

sonali31
Posts: 6
Joined: Tue Jan 08, 2019 2:14 am

Re: S3D Settings Manual

Tue Jan 08, 2019 3:58 am

Thank you for talking about the manual settings for S3D.

Code: Select all

mechanical engineer

Raise3D Pro Plus 2
Posts: 65
Joined: Thu Oct 25, 2018 2:03 am

Re: S3D Settings Manual

Tue Jan 08, 2019 4:07 pm

Thank you. Good job. Useful material

Return to “General Discussion and Tips”