How can I sequence bed leveling to be *before* heating the HB and HE?
Posted: Sun Jun 03, 2018 5:10 pm
The problem is that the heating g-code isn't even in the start script, which is:
I can, of course, manually manipulate the gcode in the generated gcode file to produce the desired effect, which is:
That does work, but it's tedious. I would rather not have to do manual manipulation every time I produce a g-code file. The problem seems to be that not all of the starting gcode is actually in the gcode start script.
Please advise.
Code: Select all
M115 U3.0.7 ; use the latest firmware version
G28 W ; home all axes without mesh bed leveling
G80 ; run mesh bed leveling routine
G1 Y-3.0 F1000.0 ; prepare to prime
G92 E0 ; reset extrusion distance
G1 X60.0 E9.0 F1000.0 ; priming
G1 X100.0 E12.5 F1000.0 ; priming
Code: Select all
G80 ; run mesh bed leveling routine
G90
M82
M106 S0
M140 S60
M190 S60
M104 S230 T0
M109 S230 T0
M115 U3.0.7 ; use the latest firmware version
G28 W ; home all axes without mesh bed leveling
G1 Y-3.0 F1000.0 ; prepare to prime
G92 E0 ; reset extrusion distance
G1 X60.0 E9.0 F1000.0 ; priming
G1 X100.0 E12.5 F1000.0 ; priming
G92 E0
G1 E-1.0000 F2400
G1 Z0.600 F1000
Please advise.