Falcon1969
Posts: 3
Joined: Tue May 22, 2018 4:51 am

How Configure a Printer with 3 Extruders but only one Nozzle

Hello,

i am new here and now i had got my Tronxy X5s and changed something.
i Changed the Mainbord to Rumba Plus and got a second Powersuply with 24V for the Headbed. i had Installed 2 Extruders more and
changed the Printhead completly to a Diamond Head with 3 Inputs in one Nozzle.

In Simplify3D i can configure a Printer with 3 Extruders, but Simplify says for each Extruder exist one Nozzle.

Thanks for Help
and Sorry for my bad English
Falcon1969
Posts: 3
Joined: Tue May 22, 2018 4:51 am

Re: How Configure a Printer with 3 Extruders but only one Nozzle

Oh Thanks for all your helps :oops:

But i found it. Now i want change the tool but how can i make that it fills the nozzle faster with the other color without printing at my objekt.
TheBum
Posts: 178
Joined: Fri May 18, 2018 11:13 pm

Re: How Configure a Printer with 3 Extruders but only one Nozzle

I think the only way to do that at present is to enable the waste pillar and configure it for how much filament you want extruded.

Return to “General Discussion and Tips”