Hi, I am looking for the Cura equivalent to "pause at height " Does Simplify have this? Or am I going to have to manually create my own gcode to do this?
Thank you!
Doug
Hi Doug and welcome to the forum!
Thank you!S3D-Alex wrote: ↑Thu Jul 11, 2019 8:55 am So the best way to do this currently in Simplify3D is to use a Post-Processing Script. This option is found in the Scripts tab of the Process Settings. For this example let's say we want to pause a standard Marlin machine at Layer 10. I would enter the following line into the Post-Processing box:
{REPLACE "; layer 10" "M0\n; layer 10"}
This will replace one of our Layer comments with an M0 followed by a new line and then the Layer 10 comment again. So the code is basically the same but with the M0 now placed before Layer 10 begins printing.
M0 is the standard pause command for most Marlin machines but some will accept M600 and a lot of printers with Repetier based Firmwares will take M25. I hope this clears things up a bit but feel free to ask any questions you might have.