davorin
Posts: 34
Joined: Wed Dec 27, 2017 1:25 pm

Atuo-Configure Material/Print Quality

Wed Apr 29, 2020 1:11 am

Good morning

I am still confused what those submenues are influencing...

So for example, when I add a new material to a profile...which settings can I actually modify?
Just the extruder and temperature settings?

But it seems that the material density/cost don't belong to the material submenu, which seem wrong...

And what settings are modified for print quality submenu?
Just the infill and layer height?


Currently I have for each different setting a profile defined...which causes after a while a very long menue (o;

I guess vase mode needs a separate profile?


thanks for clarification
richard

User avatar
ParzivalR
Posts: 9
Joined: Mon Apr 20, 2020 3:44 pm

Re: Atuo-Configure Material/Print Quality

Wed Apr 29, 2020 10:18 am

Hello!

Your question is similar to the one in this topic viewtopic.php?f=8&t=14688.

Automatic quality adjustments do not influence all profile parameters, only a few, such as layer height, fill, solid layers, etc. And the price of the material per kilogram and density is unique per profile (I consider that a price and density per material should be requested in Feature Requests). The materials submenu affects for example temperatures or fan settings.
From my point of view, it is best to create a different profile by material and important configuration (such as global offsets or First layer height)

Regards!

Return to “General Discussion and Tips”