1079
Posts: 1
Joined: Wed Nov 18, 2020 5:44 am

Extruder Stop

Wed Nov 18, 2020 5:52 am

Hi,

is there a way that I can adjust that the Extruder Head will not stop direct to the printed model. After some few stringing test prints that head always stopped in the near of the print and they glued together.

Thanks,

User avatar
dkightley
Posts: 2283
Joined: Tue Mar 10, 2015 4:09 pm

Re: Extruder Stop

Fri Nov 20, 2020 2:00 pm

You don't say what your printer is....but the solution is to ensure you have the right things in your end script.

See this thread for one particular printer: viewtopic.php?f=9&t=13818&p=52227&hilit ... ipt#p52227

You'll need something similar......post back here if you get stuck.
Doug Kightley
Volunteer at the National Tramway Museum http://www.tramway.co.uk
Railway modeller and webmaster at http://www.talkingtgauge.net

Return to “General Discussion and Tips”