marshmaglow
Posts: 1
Joined: Mon Apr 19, 2021 5:36 pm

External Thin Wall Type - causes problems

Mon Apr 19, 2021 5:55 pm

Please, has anyone had such a problem? I have been struggling with it for 3 weeks, I have the impression that it cannot be set.

I would like to print the model exactly as I designed.

Unfortunately, by setting the option "External Thin Wall Type" to "Perimeters only", the walls of the model become bold after printing. In my case, it is not acceptable, I designed the last layer with a thickness of 0.4 mm. I don't want a thicker one. Sometimes there are still holes in the last few layers.


And if I set option "External Thin Wall Type" to "Allow single extrusion walls", holes are formed in the walls.


I've already given up hope that this program can do it well. :( :( :(

I am enclosing a model, but many people have seen it and said it is not broken.
Attachments
model.stl
(54.38 KiB) Downloaded 9 times
pic2.JPG
pic1.JPG

Return to “General Discussion and Tips”