SHoutzager
Posts: 129
Joined: Sun Jan 03, 2016 4:02 pm

Bumps on side of prints

Everything was printing smoothly in previous prints then all of the sudden it kinda looks like over extrusion. Multiplier in S3D is set to 1. Any ideas?


https://www.dropbox.com/s/yml33tmqng6tk ... .jpeg?dl=0
SHoutzager
Posts: 129
Joined: Sun Jan 03, 2016 4:02 pm

Re: Bumps on side of prints

I adjusted the flow rate to 90% and set the nozzle 5 degrees lower and it looks great now.

Return to “General Discussion and Tips”