User avatar
KeyboardWarrior
Posts: 480
Joined: Thu Jun 19, 2014 5:02 pm

Tip of the Day 1- FlashForge Dreamer Lights

Tue Jan 13, 2015 3:35 pm

The FlashForge Dreamer uses G-Code to control the RGB lights. The G-Code line for the default profiles is highlighted in the picture below which is for the Starting G-Code in the process settings window. The lights are set to red for preheating and off for the print, but I personally like to print with the lights on max so I set the zero's to 255 for each of them. 0 is off, 255 is max for each RGB value.

M146 r255 g255 b255; max lights

Screen Shot 2015-01-13 at 3.31.08 PM.png

habloIngles
Posts: 80
Joined: Wed Aug 27, 2014 6:48 pm

Re: Keyboard Warrior Tip of the Day1- FlashForge Dreamer Lig

Tue Jan 13, 2015 6:02 pm

that seems pretty cool! I would definitely use this as a visual indicator of different print stages (i.e. heating up, printing, done), wish i had a dreamer :(

Twinmum
Posts: 3
Joined: Sat Jun 27, 2015 2:12 am

Re: Tip of the Day 1- FlashForge Dreamer Lights

Sun Jun 28, 2015 4:56 am

Thanks for this. Got my printer on Wednesday and Simplify3D yesterday (Saturday) Loving it, but like to be able to see what's going on inside.

Return to “General Discussion and Tips”