Billzilla
Posts: 24
Joined: Sat Oct 04, 2014 9:09 pm

Any plans to support Mingda and UP?

Sat Feb 21, 2015 4:48 pm

As per the title, just wondering.

mdlucca
Posts: 8
Joined: Sat Dec 13, 2014 12:55 pm

Re: Any plans to support Mingda and UP?

Sat Feb 21, 2015 8:19 pm

I would like to know that as well. Bought a Mingda a few months ago and Simplify3d and I havent been able to print anything decent with it :(

JoeJ
Posts: 1435
Joined: Sun Feb 16, 2014 10:52 am

Re: Any plans to support Mingda and UP?

Sun Feb 22, 2015 5:43 am

The Mingda printer lists their software as being compatible with other open-source slicers, so I imagine it would also accept Simplify3D gcode.

The Up! will probably never be supported as it uses all proprietary stuff.

Billzilla
Posts: 24
Joined: Sat Oct 04, 2014 9:09 pm

Re: Any plans to support Mingda and UP?

Sat Feb 28, 2015 3:15 am

JoeJ wrote:The Mingda printer lists their software as being compatible with other open-source slicers, so I imagine it would also accept Simplify3D gcode.
Looks like that's the case, I emailed them about using Simplify3D and this was their reply -

"Yes, our 3D printer is also compatible with G-code, so you can use the simplify3D software to help with your work. (Normally, we use CURA software for slicing)"

Interesting .....

edvardrahelic
Posts: 4
Joined: Wed Aug 05, 2015 7:25 pm

Re: Any plans to support Mingda and UP?

Wed Jan 13, 2016 5:03 am

hI

Good profile for Mingda Glitar 6c,,,For different model only change printing volume( Hight of print ) ,,If you need firmware,display drivers or Win drivers be free to ask,,
Attachments
Mingd G6.fff
profile for Mingda 6
(9.05 KiB) Downloaded 270 times

edvardrahelic
Posts: 4
Joined: Wed Aug 05, 2015 7:25 pm

Re: Any plans to support Mingda and UP?

Wed Jan 13, 2016 5:12 am

settings
Attachments
SETTING-S3D-635650036643950000.jpg

TeeGeeRoo
Posts: 1
Joined: Wed Jan 06, 2021 5:05 pm

Re: Any plans to support Mingda and UP?

Wed Jan 06, 2021 5:10 pm

@edvardrahelic - Do you still have software for the Glitar 6c (firmware, drivers)? Thx :)

Return to “General Discussion and Tips”