Posts: 86
Joined: Sat Mar 16, 2013 9:27 pm

Ver 1.1.5 Bridging

Sat Aug 31, 2013 5:46 pm

I happened to be in the room when my 20 hour print got to doing some bridging on a PLA part I sliced using Ver 1.5
and I thought I would share what this awesome software can do. I have never touched the bridging settings.
First Bridge
Second Bridge
The Finished Windows.

Posts: 35
Joined: Sun Mar 31, 2013 12:07 am

Re: Ver 1.1.5 Bridging

Sun Sep 01, 2013 9:26 pm

Pretty impressive, haven't had prints push the M2/ Creator that far, yet..... :D

I'm firmly convinced the M2 and Creator are the finest setup in Fused Filament Fabrication (FFF) in it's class, and beyond. If you can't do it with a M2 and Creator, hang it up and buy an Eggbot.


Printed on Makergear M2
Scaled to 35%
Sliced to .1mm using Creator
Material: PLA by

Posts: 1
Joined: Sun Sep 15, 2013 7:11 pm

Re: Ver 1.1.5 Bridging

Sun Sep 15, 2013 7:59 pm

hey earsmith-

would you mind sharing an fff file of the settings you used to make that print?

Return to “General Discussion and Tips”