Printing with 2 colors

[oacilamaf]

Hi all

Looking for help with printing with the two extruders. I tryed using the dual extruder wizard and the normal print profiles but unsucessful. When i use the dual extrusion wizard it assumes i am using the second extruder for support and if i use the normal profiles the preview of the part becomes deformed. Here are some pictures:





Any thoughts?
Also if anyone could share some print profiles, i would be very thankfull
By the way, my printer is Leapfrog HS

Regards
JS

[KeyboardWarrior]

AHHH This is actually correct!!!!

That's the Ooze Shield that is printed around the part to catch any ooze dripping from the unused nozzle. If you go to Edit Process Settings-->Additions and disable the Ooze Shield you'll see your part is being sliced correctly. I would recommend running the print as is to verify this!

[oacilamaf]

Thanks for your help.

You are correct, if I remove the ooze option the part looks fine.
I am unable to do a print to confirm but i am positive that was the issue.

[razster]

This video was really helpful for me and shows them removing the ooze shield at the end:
https://www.youtube.com/watch?v=qPufaJhyqME