User avatar
smython
Posts: 1
Joined: Tue Aug 01, 2017 3:49 am

Tevo Tarantula Dual Extruder Extended Bed FFF Profile

I have a dual extruder TEVO Tarantula with the extended bed. I have searched and searched for a profile, but have been unable to locate one. So, I created my own, and I figured I would share it here in hopes that people could use and improve it.

https://drive.google.com/file/d/0Bxp2rG ... sp=sharing

It has Fast, Medium, and High quality profiles built in, along with multiple material settings (although I have only tested it with PLA) , and it shows up as a proper dual extruder profile and can therefore be used in the dual extruder wizard. I tend to print very fast, and my profile speeds may be more aggressive than most people want, but I have had good luck with them thus far.

The only thing I am unsure of is the offset on the printer heads... I have measured many times with my calipers, and i have it set as close as I can get it. Let me know if anyone can improve the profile.
mleecreative
Posts: 1
Joined: Tue Mar 20, 2018 6:53 pm

Re: Tevo Tarantula Dual Extruder Extended Bed FFF Profile

Hello,

First of all, thank you so much for taking on writing the FFF profile. I just have one quick question.

Is your Tevo dual extruder with dual nozzle? I have one that is dual extruder with single nozzel (I bought this one: https://www.aliexpress.com/item/2-in-1- ... 37154.html) and was wondering what would I need to change in order to make sure the FFF profile will work with single nozzel?


Thank you so much once again.

Best Regards,
Michael Lee
happymark
Posts: 1
Joined: Sun Jun 17, 2018 10:57 am

Re: Tevo Tarantula Dual Extruder Extended Bed FFF Profile

@smython Have you tried printing the square grid for calibration?

Thank you for the profile.

http://www.sailfishfirmware.com/doc/tun ... ation.html

Return to “General Discussion and Tips”