Page 1 of 1
Makergear M3-ID .fff's
Posted: Tue Oct 24, 2017 6:10 pm
by mathisyourfriend
I've used the stock .fff for T0=PLA and T1=PVA (support). It was poor. Does anyone have a .fff for this configuration that works well?
Re: Makergear M3-ID .fff's
Posted: Wed Oct 25, 2017 7:42 am
by brian442
Do you mean the FFF files provided by MakerGear? I don't see the M3-ID listed in the S3D configuration assistant.
You might want to try contacting MakerGear since they probably have a profile for it already
Re: Makergear M3-ID .fff's
Posted: Wed Oct 25, 2017 3:40 pm
by mathisyourfriend
Sorry, should have been clearer. The Makergear site has a link to the suggested S3D .fff's. These included stuff like 2 levels of skirt with 16 outlines each. I haven't been able to get the PLA/PVA support .fff to work right. I'm sure S3D and/or the community will rectify this soon. The M3-ID is a big step up from the excellent M2 and I can't wait to see what it'll do with well tuned profiles.