tana4
Posts: 7
Joined: Tue Nov 28, 2017 10:47 am

G-code M107

Tue Nov 28, 2017 10:55 am

Does it ever use s3d in the generated g-code M107?
Or just M106 S0.

brian442
Posts: 1243
Joined: Mon Nov 28, 2016 5:35 am

Re: G-code M107

Wed Nov 29, 2017 2:36 am

I think those 2 commands do the same thing, so you could probably use either one.

But anyways, you can also change it by going to Tools > Firmware Configuration, clicking on the FFF tab, and editing the "Fan Off" command.

wirlybird
Posts: 1242
Joined: Sun Jul 17, 2016 1:32 pm

Re: G-code M107

Wed Nov 29, 2017 7:24 am

It's an old command not used in some firmware so use M106 S0 now.

tana4
Posts: 7
Joined: Tue Nov 28, 2017 10:47 am

Re: G-code M107

Wed Nov 29, 2017 3:36 pm

Thank you.
I want to use the M107 for another function. I wanted to be sure M107 s3d was not used.

Return to “General Discussion and Tips”