drclock
Posts: 2
Joined: Mon Mar 19, 2018 3:48 am

Settings For Makerbot Z18

What settings have you found works best for your Z18 for PLA?
User avatar
dkightley
Posts: 2405
Joined: Tue Mar 10, 2015 4:09 pm

Re: Settings For Makerbot Z18

I would have thought that the default setting in the Z18 configuration would be the best starting point...and would require only slight tweaking to compensate for variations in filament, etc.

I suggest you start there.....and then ask for any specific advice if you're not able to sort any particular issue out.
Doug Kightley
Volunteer at the National Tramway Museum http://www.tramway.co.uk
Railway modeller and webmaster at http://www.talkingtgauge.net
drclock
Posts: 2
Joined: Mon Mar 19, 2018 3:48 am

Re: Settings For Makerbot Z18

Thank you for your advice Doug. Is that what your did with your Z18?

Return to “General Discussion and Tips”