justpatc
Posts: 1
Joined: Mon Jun 18, 2018 11:52 am

Missing half of Model

Mon Jun 18, 2018 12:16 pm

How do I fix settings to show/print full model?

TheBum
Posts: 45
Joined: Fri May 18, 2018 10:13 pm

Re: Missing half of Model

Tue Jun 19, 2018 1:09 pm

Is the other half visible if you flip the virtual bed over? If so, press the centering button to get it to be completely above the bed.

If it's not there, then you may have a non-manifold model. Go to the Mesh menu and select "Separate Connected Surfaces" to see if all parts of the model appear. Make sure you do all the centering first because invoking automatic centering afterward will likely scatter the parts.

User avatar
dkightley
Posts: 1591
Joined: Tue Mar 10, 2015 3:09 pm

Re: Missing half of Model

Tue Jun 19, 2018 1:37 pm

How do I fix settings to show/print full model?
We could go on guessing for ages!!! Could you expand considerably on the problem you're having. A ten word single sentence conveys almost nothing!!!

If you really want some help, you're going to start by helping us!
Doug Kightley
Volunteer at the National Tramway Museum http://www.tramway.co.uk
Railway modeller and webmaster at http://www.talkingtgauge.net

Return to “Troubleshooting and Bug Reports”