I'm going around in circles on this one, this is the 3rd forum as the 3rd part of this messed up trifecta of problems (S3D, Filaswitch script, Duet Wifi).
Basically, have Rostock Max (with Duet firmware) with Prometheus multi filament system (shared single nozzle with splitter). Want to print different filament at diff temps (support and say PLA). In theory all the parts of this system support this.. but its not working as intended.
Duet supports this, but is getting messed up as S3D is sending the "other" extruder nozzle temps as separate extruder nozzles. This means the last temp set (eg 210c for Extruder 2) overrides the current active temp (eg 190c for Extruder 1), making it a complete mess when using prime tower scripts and generally mulitple extruders. Everything gets jumbled up and the wrong temps are becoming active on the single extruder as it tries to print.
https://forum.duet3d.com/topic/5055/tem ... laments/12
Is this a (crippling) limitation of S3D's multiple extruder support or am I setting it up wrong?