mstein
Posts: 9
Joined: Sat Mar 31, 2018 3:03 pm

SOLVED: Cannot slice grid

Sat May 12, 2018 5:51 am

Hi,

I've got an CR-10S with nozzle 0.4 and want to print this grid.
grid1.png
But it does not work. Elements will be removed on slicing.
grid-sliced.png
Each line is 0.4mm so nozzle width. The inner part is 5.6mm so 14x nozzle with "space".

I thought this could work then... what's wrong?
Even Cura cannot slice it completely.

STL attached.

Regards,

Markus
Attachments
Display_Grid v3b.stl
(637 KiB) Downloaded 62 times
Last edited by mstein on Sat May 12, 2018 2:34 pm, edited 1 time in total.

rrdavis
Posts: 421
Joined: Sat Dec 09, 2017 4:52 am

Re: Cannot slice grid

Sat May 12, 2018 6:47 am

It slices and looks fine to me. I'm guessing you need to change your thin wall settings. The article below explains it better:
https://www.simplify3d.com/support/arti ... -features/

mstein
Posts: 9
Joined: Sat Mar 31, 2018 3:03 pm

Re: Cannot slice grid

Sat May 12, 2018 2:34 pm

Thanks!!

Solution was:
Advanced --> Thin Wall Behaviour
External Thin Wall Type - Allow single extrusion walls
internal Thin Wall Type - Allow single extrusion fill

Didn't have a look on advanced... so maybe I would have seen it directly.

Return to “Troubleshooting and Bug Reports”