Posts: 1
Joined: Thu Nov 15, 2018 9:51 am

Printer never starts printing, but shows "Print Complete"

Thu Nov 15, 2018 10:01 am

I am currently using a Makergear M2, with the new simplify 3D 4.1. The bed and extruder both heat up. At first, the print would start too far from the bed, so I went into the edit process settings to fix it. No matter how much I changed the height of the bed, the print always started printing from the same height.

I switch the print, thinking that might've been the problem. Now the printer doesn't start printing at all, but shows the "Print Complete" tab when I press the print from USB button.

Posts: 21
Joined: Fri Jul 31, 2015 9:41 am

Re: Printer never starts printing, but shows "Print Complete"

Tue Nov 20, 2018 5:27 pm

I have the same problem with 4.1 and an Anycubic I3 Mega.

If you go into the control panel (ctrl + p) first and connect the printer manually, it should work. If not, restart the printer and try connecting again. Definitely another bug in 4.1...

Return to “Troubleshooting and Bug Reports”