Page 1 of 1

Weird support issue

Posted: Tue Nov 27, 2018 9:22 am
by nuggetz
I just generated some supports and the placement before slicing looked ok but check out the result.

Re: Weird support issue

Posted: Tue Nov 27, 2018 9:25 am
by dragonn
Your model is probably broken, try repairing it with for example netfab.

Re: Weird support issue

Posted: Tue Nov 27, 2018 9:50 am
by nuggetz
3D Builder in windows didn't find any issues. Slices ok as is in Slic3r.

Re: Weird support issue

Posted: Tue Nov 27, 2018 12:48 pm
by dragonn
Can you post the STL file and factory file?

Re: Weird support issue

Posted: Tue Nov 27, 2018 2:13 pm
by dkightley
PS the factory file will contain the stl file.....so you don't need both!

And by factory file, I mean the file with the .factory suffix...…..not the profile file, which has .fff as its suffix.

Re: Weird support issue

Posted: Tue Nov 27, 2018 11:49 pm
by nuggetz
Here you go

Re: Weird support issue

Posted: Wed Nov 28, 2018 5:19 am
by dkightley
Try the attached. Shape file repaired using 3D Builder.

When using 3D Builder, you need to "Import" the shape to kick in the checking.