mnesys
Posts: 3
Joined: Thu Jan 10, 2019 11:06 am

Tool change retraction problems

Thu Jan 10, 2019 11:17 am

Hi,

using following settings in "other" tabs:

<toolChangeRetractionDistance>7</toolChangeRetractionDistance>
<toolChangeExtraRestartDistance>-0.5</toolChangeExtraRestartDistance>
<toolChangeRetractionSpeed>600</toolChangeRetractionSpeed>

sometime the extruder position is reset without restart extrusion:

G1 E-7.0000 F600
T2
; feature prime pillar
G1 X68.614 Y102.356 F6000
G1 X66.962 Y104.599
[...]
G1 X77.528 Y139.453
G92 E0.0000


usually there is a "G1 E-0.5000 F600" before the G92 that is missing twice in my G-code (104 tools changes, 102 are Ok, 2 wrong).

mnesys
Posts: 3
Joined: Thu Jan 10, 2019 11:06 am

Re: Tool change retraction problems

Thu Jan 10, 2019 12:08 pm

I found this problem occures the first time the tool is used... which is good if you really have 2 complete tools, but I have two extruders for 1 hot end...

Return to “Troubleshooting and Bug Reports”