SailRabbit
Posts: 1
Joined: Tue Apr 09, 2019 9:29 pm

Over-Extrusion and under-extrusion on print

Tue Apr 09, 2019 9:50 pm

Hi,

I have recently switched from Cura to Simplify3d for the additional print quality, however I cannot remove this on my 3d prints.

The walls of the print seem to be perfect, but the "infill" area seems to be under-extruded on the top and over-extruded on the bottom. This only occurs near walls, though. Also, the print-head drags against the top surface and creates scars.

If anyone knows which settings affect this, please let me know, Thanks!


Top of Cube:
top.jpeg


Bottom of Cube:
bottom.jpeg

Return to “Troubleshooting and Bug Reports”