http://imgur.com/gallery/jBnoNkN
I'm printing a cylindrical piece on the ender 3 with simplify 3D and getting strange stringing near the bottom of the print. The weird part is that the nozzle never crosses that part in the slicer, so it shouldnt occur. Any idea what might be causing this?
Settings are 195 C nozzle temp, 0.12 mm layer height, 20% infill, 2000 mm/min print speed, 9mm retraction distance, 0.1mm vertical retraction distance, 0.3mm coasting distance. "Avoid crossing crossing outline for travel movements" is enabled with a max allowed detour factor of 3.