For some unknown reason my Extruder isn't turning during a print. I am running the TH3D Firmware 2.11 and even after issuing an M190 S235 as well as an M104 S65 and letting the machine sit like this for 5 minutes. I can't get any movement out of my Extruder. It is getting a signal as I can't turn the drive gear by hand while it is under power. I have gone through the firmware line for line and I have also gone through the gcode files I am trying to run and they all include E? Distance movements. I've gone through the machine control options to make sure that they're fine and everything is in order. I know that the Nozzle is hot enough to extrude as there is filament oozing from the nozzle.
I am at a total loss and its looking more and more like my Ender 3 is now a brick if someone can't come up with any fixes other than to criticize my request for help.