Suffsails
Posts: 3
Joined: Mon Jul 22, 2019 9:28 am

cooling fan preheat

Mon Jul 22, 2019 9:30 am

Hi,
the cooling fans are turning on when preheating, this is new since the last update (all my previous files preheat ok)

S3D-Alex
Posts: 244
Joined: Thu Aug 30, 2018 1:23 pm

Re: cooling fan preheat

Mon Jul 22, 2019 10:10 am

Could you please post a Factory File showing this behavior?

Suffsails
Posts: 3
Joined: Mon Jul 22, 2019 9:28 am

Re: cooling fan preheat

Mon Jul 22, 2019 10:39 am

these?
Attachments
sufsailtt.stl
(1.64 MiB) Downloaded 5 times
GoPro_arm.factory
(14.43 KiB) Downloaded 6 times

Suffsails
Posts: 3
Joined: Mon Jul 22, 2019 9:28 am

Re: cooling fan preheat

Mon Jul 22, 2019 10:40 am

just had another simplify update so i'll try that - we have been manually toggling the fan off when preheating

S3D-Alex
Posts: 244
Joined: Thu Aug 30, 2018 1:23 pm

Re: cooling fan preheat

Mon Jul 22, 2019 12:55 pm

Thanks for posting your Factory File! So currently your Cooling tab has two setpoints for 0 and 80 respectively. The issue is that both of your setpoints are currently at Layer 1. Since the software cannot make the fan be at both 0 and 80 percent simultaneously it defaults to the last value you set for that layer. Please let me know if you have any other questions!

Return to “Troubleshooting and Bug Reports”