Print Time Estimate is way off
Posted: Fri Aug 30, 2019 1:53 pm
I'm running a snapmaker 1.0 3 in 1 machine. Have no problems with printing except the time estimate is really off.
Example: Printed the Baby Groot at 50% height and the estimate said 6 hours and 54 min. Actual was 8 hours and 24 min. (Granted some of that was the heating of the bed and nozzle (but not >1 hour).
Example: Printed the Baby Groot at 79% height - 118mm and the estimate said 12 hours and 15 min. Actual was 15 hours and 50 min. It was off by 3 hours and 35 min.
Why would it be that far off? The estimate is off on all prints.
Prints turned out super...
Example: Printed the Baby Groot at 50% height and the estimate said 6 hours and 54 min. Actual was 8 hours and 24 min. (Granted some of that was the heating of the bed and nozzle (but not >1 hour).
Example: Printed the Baby Groot at 79% height - 118mm and the estimate said 12 hours and 15 min. Actual was 15 hours and 50 min. It was off by 3 hours and 35 min.
Why would it be that far off? The estimate is off on all prints.
Prints turned out super...