jaybeckham
Posts: 3
Joined: Sun Oct 27, 2019 6:52 pm

Lulzbot Mini with optional noozle

Sun Oct 27, 2019 6:59 pm

I have upgraded by Mini to the SL nozzle which is 0.25mm rather than the original
0.50mm one. Where in this software to I indicate my new SL nozzle?
Thanks!
Jay Beckham

S3D-Chris
Posts: 166
Joined: Wed Jun 20, 2018 12:52 pm

Re: Lulzbot Mini with optional noozle

Mon Oct 28, 2019 1:43 pm

You will need to update the Nozzle Diameter option in the Extruder tab of your Process Settings.

jaybeckham
Posts: 3
Joined: Sun Oct 27, 2019 6:52 pm

Re: Lulzbot Mini with optional noozle

Mon Oct 28, 2019 3:52 pm

Thanks for the information. I will work on that. Now if I could just get S3D to connect with my Lulzbot. It uses Com 4 and S3D did and couldn't connect. May have to call the help desk I guess.

Jay Beckham

S3D-Alex
Posts: 273
Joined: Thu Aug 30, 2018 1:23 pm

Re: Lulzbot Mini with optional noozle

Fri Nov 01, 2019 8:08 am

We have an FAQ entry with some suggestions that may help so I have included a link to that below. If those steps do not work could you please post a screenshot of the communication log in Simplify3D when you try and connect to your machine?

https://www.simplify3d.com/support/faq/#quest-6354

Return to “Troubleshooting and Bug Reports”