Surely NO, the artifacts are caused by your settings.
Start to change step by step , at first Restart Distance NEGATIVE (~ -0,15) and 2nd. step Multiplier to 0,95.
This allows to play with the values to find out optimal settings.
Your print temperature seems to be to high, have a look to Filamentworld.de, they have recommended : PETG Drucktemperatur zwischen 195 – 225 °C.
To high temperature cause low viscosity of the filament, so that material is coming out of the nozzle without pressure by the extruder.
Stop Coast and Wipe; this settings are fine tuning but you have to find out first the base settings.