St0mp
Posts: 6
Joined: Wed Apr 25, 2018 5:28 pm

3dlabprint F86 F8

Sat Nov 30, 2019 6:49 pm

incorrect start point in my part Ok i have a part not coming out right and i tried turning the part but it dont change along with other things that dont change print direction here is what my part looks like on a fail https://drive.google.com/open?id=1FZrUS ... 9hhZE8SsTG. I found why this part keeps failing at that point. screenshot at area of effect. https://drive.google.com/open?id=1dz3ul ... 0gSO1eXN8a the toolhead is moving from right to left. it has chosen to do the bridge first in air then move to the part. this is causing the plastic to ball up and catch the nozzle on the next pass and knock it over. please help me get this toolhead to not print the bridge first. Thank you

Return to “Troubleshooting and Bug Reports”