furkasocal
Posts: 1
Joined: Thu Sep 03, 2020 1:59 pm

Poor top layer performance over infill

Thu Sep 03, 2020 2:12 pm

I am having a terrible time with the printing of the top layers that cover my infill. As you can see it doesn't seem to adhere to the infill and just gums up the nozzle. First layer bed adhesion, and printing of the infill pattern itself works great, it is just when it has to bridge the gaps of the infill to create the tops layers that it starts to look like this. I am printing ABS at 210 with 30% infill and 6 top layers on a Flashforge Inventor.
Attachments
IMG_20200903_081129.jpg
IMG_20200903_080430.jpg

User avatar
DarthRevan
Posts: 477
Joined: Wed Feb 18, 2015 8:29 am

Re: Poor top layer performance over infill

Wed Sep 09, 2020 3:07 pm

Can you upload a factory file? It's hard to say for sure what is causing this without looking at much more than printing temperature, infill% and # of top layers.

Return to “Troubleshooting and Bug Reports”