neilpeartwannabe
Posts: 2
Joined: Thu Sep 03, 2020 7:25 pm

WHY is my raft printing so SLOWLY???

Sat Oct 03, 2020 2:34 pm

This program is just driving me insane. I have changed ALL my speed settings to 100%, yet my raft is printing ridiculously slow. WHY??? Please see attached pic.
Attachments
WHY IS RAFT PRINTING SO SLOWLY!.png

parallyze
Posts: 193
Joined: Fri Jun 05, 2015 4:18 am

Re: WHY is my raft printing so SLOWLY???

Mon Oct 05, 2020 4:52 pm

neilpeartwannabe wrote: This program is just driving me insane. I have changed ALL my speed settings to 100%, yet my raft is printing ridiculously slow. WHY??? Please see attached pic.
Your default printing speed is set to 1500mm/min = 25mm/s which isn't really fast, either...

As far as I can tell the raft is printed at 75% of the default printing speed (and if 1st layer speed = 100%). 1125mm/min = 18.75mm/s in your case.

Can you confirm this, does raft speed go up to 2250mm/min = 37.5mm/s if you set your default printing speed to 3000mm/min = 50mm/s?

What's the raft speed/feed rate in the gcode created, did you check that?

Return to “Troubleshooting and Bug Reports”