KumoriMyou
Posts: 1
Joined: Wed Nov 11, 2020 5:10 pm

Printer tries to print in corner

Wed Nov 11, 2020 5:16 pm

When I start a print the printer goes from home in the top right strait to the bottom left and bounces on the walls and attempts to print in the corner.
X260 Y155 Z155
X130 Y77.5 Z0

When i change the origin offset to -80 -30 it moves to the middle area but not centered and will print fine.
X260 Y155 Z155
X-80 Y-30 Z0

how can i fix this issue
what am I doing wrong?

Return to “Troubleshooting and Bug Reports”