rolohaun
Posts: 1
Joined: Fri Oct 24, 2014 4:27 pm

Filament Diameter and Extrusion Multiplier have no effect

Fri Oct 24, 2014 4:31 pm

I must be doing something wrong but I am printing on my Replicator 2 and too little material is coming out , changing the extrusion multiplier has not affect at all same with filament diameter I have changed it to 2.1 all the way down to 1.6 and nothing changes. I have measured my filament and it's 1.8mm but nothing helps. Are my changes not saving?

User avatar
jimc
Posts: 1124
Joined: Wed Aug 28, 2013 11:02 pm
Location: mullica, nj
Contact: Website

Re: Filament Diameter and Extrusion Multiplier have no effec

Sun Oct 26, 2014 7:26 pm

check the output gcode in a text viewer and compare the output gcode for the extruder and see if its different. ive never heard of the multiplier not working.

PrCTRL
Posts: 10
Joined: Mon Jun 09, 2014 5:12 am
Contact: Website

Re: Filament Diameter and Extrusion Multiplier have no effec

Tue Oct 28, 2014 6:15 am

may be your Nozzle is parially blocked ?

regards
Gerhard

Return to “Troubleshooting and Bug Reports”