Posts: 8
Joined: Wed Mar 17, 2021 3:12 am

Retraction before layer 1 starts

Fri Apr 30, 2021 2:52 am

The issue I'm facing is that S3D sends a retraction command before it starts printing layer 1. If I do not use a skirt/brim then the first part of layer 1 is starved of filament. It is not part of my start script, it looks like S3D is putting the command in there.

How do I stop it from happening, this is forcing me to use a skirt/brim on every print. The G1 E-6.5 is part of Process1, how do I stop S3D from doing this. I know I can comment it out but I shouldn't have to, unnecessary post step.

; ** End start script
; process Process1
; layer 1, Z = 0.220
; Start Tool Change
; End Tool Change
G92 E0.0000
G1 E-6.5000 F4800
; feature skirt
D12 500 PETG.fff
(17.9 KiB) Downloaded 10 times

Return to “Troubleshooting and Bug Reports”