Re: Gaps in Perimeters (Again)
Posted: Mon Jul 26, 2021 2:46 pm
I got all three processes into Excel, combined them all on one sheet, and then thinned it down to the essential stuff. I ditched things like support & raft settings, which aren't involved.
I've attached a PDF that has the differences in settings hilited, using Airscapes's gap-free process as my "gold standard."
A lot of the differences are minor, or should have nothing to do with the gap problem, like my fan speeds.
Here's the really condensed version of the differences I think may be involved
As time & printer availability permit, I'll start modifying my process to match Airscapes and see if I can find the critical setting(s) that cause the gaps. I think I can speed up the process by using a binary search approach. I'll try the top half of the settings, and then the bottom half. That should narrow it down a lot quickly.
I've attached a PDF that has the differences in settings hilited, using Airscapes's gap-free process as my "gold standard."
A lot of the differences are minor, or should have nothing to do with the gap problem, like my fan speeds.
Here's the really condensed version of the differences I think may be involved
As time & printer availability permit, I'll start modifying my process to match Airscapes and see if I can find the critical setting(s) that cause the gaps. I think I can speed up the process by using a binary search approach. I'll try the top half of the settings, and then the bottom half. That should narrow it down a lot quickly.