I am using a Hyrel3D Engine; my intent is to print with multiple nozzles. Their printers have a built-in computer system, and the software used to run the machine will not accept M218 commands. But the printer's firmware is Repetier, which generally recognizes M218. I checked the box "Apply toolhead offsets to G-code coordinates" in the G-Code tab in the FFF settings window, thinking this would hard code the toolhead offsets. This, however, did not appear to do anything. Checking this box or not resulting in identical gcode files.
Is there an alternative to M218? Or a way to hard code the coordinate offsets in the G1 commands?