brian442 wrote:I'm guessing that the layer setpoints you are putting in some of the processes aren't correct, but it would be easier to help if you posted your factory file
Thanks brian442. I made a mistake when looking for the M104s in the code. The temperatures **are** changing at the correct Z height. When reviewing my G-Code I was looking at the *layer height* and not the Z height. All is well, although I did have to change my M104s to M109s for my model. Is there a way for me to script this... have to check? FWIW, I used an openscad script, I got from thingiverse, to build a temperature test tower that increases temps every 1cm to find an optimum filament temp... thus the M109 instead of the M104.