RDGhost
Posts: 3
Joined: Fri Apr 22, 2016 12:37 pm

ROBO R1+ Bed Leveling

Thu Jul 06, 2017 8:40 pm

I removed G29 Auto level I get all my setting right for a perfect first layer I start the print over right after I get the first print off. Now one side of the bed is seemingly higher than the other but cheek the height with a piece of paper for manual Leveling and it is fine start print its not and I have to change the z g-code off set every time.

Return to “Troubleshooting and Bug Reports”