Posts: 3
Joined: Mon Jul 13, 2015 3:50 pm

Connect to Printer over Wifi from S3D

Fri Aug 11, 2017 12:32 pm

I have a Creality CR10 printer.
Have Octopi installed
Raspberry Pi 3
iMac Computer
Simplify3D 4.0

I can connect to the Octopi by typing the IP address into my browser and logging on.
I can print through the Octopi and watch the Camera on the printer.
What I would like to do is be able to Add a Port somehow on my mac that would communicate to this IP address.
This way, I could select this Port in Simplify3D and send the print to that port.
Has anyone done this on a Mac, and if so, do you have a step by step process to do it.

Thanks in advance

Return to “Troubleshooting and Bug Reports”