Silencius
Posts: 2
Joined: Thu Nov 16, 2017 5:58 am

CR-10S cant turn off nozzle cooling fan

Hey guys, I hope you can help me out.

I just cant get the cooling fan for the nozzle on my cr-10s to turn off during the first layer, even though it is set to do so in Simplify3D. Is there a setting I am missing somewhere? Other scripts seem to work fine, but I have no control over the fan. It just keeps blasting air at full speed no matter what I set it to in the pre-layer fan control.

Any advice is greatly appreciated.
brian442
Posts: 1243
Joined: Mon Nov 28, 2016 5:35 am

Re: CR-10S cant turn off nozzle cooling fan

Does it work if you try to turn the fan off from the machine control panel when you are connected over USB?
Silencius
Posts: 2
Joined: Thu Nov 16, 2017 5:58 am

Re: CR-10S cant turn off nozzle cooling fan

It was just me being a complete novice. I didnt notice the small fan to the right on the nozzle. I was watching the fan for the hot end. It was working the whole time! :oops:

Return to “Troubleshooting and Bug Reports”